During the use of the wire stripping machine, the clamping jaws must be used to fix the wire in order to maximize the precision of the wire stripping and cutting without damaging the wire. How should we troubleshoot when the gripper cannot hold the wire and cannot fix the wire?

       Let's talk about the possible reasons why the gripper price cannot hold the thread.

The air pressure of the air cylinder is not enough, which causes the clamping jaws to clamp the thread too weakly, so that the thread cannot be clamped;

The gripper jaws are worn out during long-term use;

The position of the gripper is wrong, or the actions cannot be coordinated at all times;

There is debris in the gap between the jaws, which prevents the closing between the jaws.

        Simple judgment method. If conditions permit, use human to manually clamp the thread and close the clamping jaws. If the thread can be clamped, it may be caused by the first and third reasons. If the thread still cannot be clamped, then It may be the second or fourth reason. For the second and fourth reasons, you need to remove the clamping jaws to check for wear or debris in the gap. If worn, replace the clamping jaws. If there are debris, use the back of the blade to remove debris.

        Of course, the operation of the equipment may also be caused by other reasons. You can consult the corresponding after-sales service to solve such problems.